S31603/316L Stainless steel plate
S31603/316L stainless steel is the second most commonly used austenitic stainless steel than 304 stainless steel. Due to the addition of Mo, SS 316 has a great improvement in corrosion resistance and certain properties compared to SS304. 316 reduced chromium content, increased nickel content, and added 2-3% Mo. The addition of Mo can enhance the resistance "to pitting and crevice corrosion caused by chloride. Therefore, 316 SS is widely used in marine applications or sea environmental situation popularly.
Quick inquiry

PRODUCT DISPLAY

We can not only provide you with ordinary steel, but also help you find very personalized steel, such as special steel, special size, special process shape and so on.

StandardAISI,ASTM,BS.DIN.EN,GB,JIS etc.
ThicknessCold Rolled:0.2- 3.0mm
Hot Rolled: 3.0- 18.0mm
Thick Plate:20 - 150mm
WidthCold Rolled:1000,1219,1250mm
Hot Rolled:1250,1500,1800,2000,2200mm
LengthFixed Size:1220x2440,1500 x6000,1800 x(6000 -9000),2200 x(6000- 12000)mm or as Required
ToleranceAccording to Standard
SurfaceNO.1,2D,2B,NO.4,HL,BA,8K etc.
ApplicationsConstruction,Modern Architecture,Chemical and Fuel Tankers,Chemical and Petro-chemical Plants, Food Processing and Pharmaceutical lndustries where Clean Environments are Required
Quality ManagementISO9001,CE,Third Party Testing / Inspection, Certifications which Apply forBuyers'Countries


展示42B.jpg

Chemical composition:

S31603/316LCSMnPSCrNiMoNCu
Requirements%≤0.08≤1.00≤2.00≤0.045≤0.03016-1816.0-18.52.0-3.0

表面.png

SurfaceCharacteristicProcessing Technology
N0.1OriginalPickled after hot rolling
2DBluntHot rolling + annealing shot peening pickling + cold rolling + annealing pickling
2BBlurredHot rolling + annealing shot peening pickling + cold rolling + annealing pickling + tempering rolling
N0.3MattePolishing and tempering rolling with 100-120 mesh abrasive materials
N0.4MattePolishing and tempering rolling with 150-180 mesh abrasive material
NO.240MattePolishing and tempering rolling with 240 mesh abrasive materials
NO.320MattePolishing and tempering rolling with 320 mesh abrasive materials
NO.400MattePolishing and tempering rolling with 400 mesh abrasive materials
HLBrushedGrind the surface of the steel belt with an appropriate grinding grain size to make it show a certain longitudinal texture
BABrightThe surface is annealed and shows high reflectivity
6KMirrorRough grinding and polishing
8KMirrorFine grinding and polishing

Corresponding table of product brand:






DINENASTMAISlUNSGB
1.431x10CrNi18-8301

1.4318X2CNiN18-7301LN

1.4307x2CNi18-9304LS30403
1.4306x2CINi19-11304LS304030OCr18Ni9
1.4311x2CrNiN18-10304LNS30453
1.4301X5CrNi18-10304S3040006Cr19Ni10(GB/T3280-2007)
1.4948X6CrN18-11304HS30409
1.4303x5CrNi18-12305

1.4541x6CrNiT18-10321S321000Cr18Ni11Ti
1.4878x12CrNiTi18-9321HS32109
1.4404x2CrNiMo17-12-2316LS3160300Cr17Ni14Mo2
1.4432x2CrNiMo17-12-3316LS3160300Cr17Ni14Mo2
1.4435x2CrNiMo18-14-3316LS3160300Cr17Ni14Mo2
1.4401X5CrNiMo17-12-2316S316000Cr17Ni12Mo2
1.4436x3CrNiMo17-13-3316S316000Cr17Ni12Mo2
1.4406x2CtNiMoN17-12-2316LNS31653
1.4571x6CrNiMoTi17-12-2316TiS31635
1.4429x2CrNiMoN17-13-3316LNS31653
1.4438×2CrNiMo18-15-4317LS31703

x10CrNiTi18-9347
0Cr18Ni11Nb
1.4512x6CrTi12409
0Cr11Ti



SS41000oCr13


410
1Cr13


4201
2Cr13
1.4016x6Cr17430
1Cr17
1.4118x40CrMo15440AS440028Cr13
1.4112
440BS440049Cr13
1.4125
440CS4400311Cr18


440FS44020
1.45391NiCrMoCu25-20-5904LN0890400Cr20Ni25Mo4.5Cu
1.4547X1CrNiMoCuN20-18-7
S31254


PACKAGING